About a year-and-a-half ago I started harsh therapy for depression and anxiety.
My therapist wanted me to get involved in modern hobbies and to find therapeutic ways to release my tension! One of my favorite things to do is to create things with my hands! She proposed that I start trying some Ceramics and pottery, as a modern way to moderate to my mental health. I was seriously excited by the idea and hastily joined a Pottery Studio. Within a few months, but, I could not continue to afford the off-site studio. I decided to build my own pottery. It turns out that it’s not a unquestionably extravagant hobby… Except for the Heating, Ventilation plus A/C requirements, and little did I know, in order to respectfully toil with Clay you need unquestionably particular air temperature and air quality settings, but depending on the type of clay that you want to toil with, you need to dial the indoor air temperature and quality to some particular parameters. If you don’t have the ideal temperature and humidity levels, your clay runs the risk of drying out excessively. If the humidity is too high, it also could refuse to dry, and you will be left with a pile of mud on your table. thanks to these particular air temperature requirements, I had to upgrade my central heating and cooling system to complete the Pottery Studio. I installed modern Zone controls Heating and Cooling and an advanced dehumidifier which is connected into the central Heating, Ventilation plus A/C controls. I also put in a smart thermostat so I can control the air quality from anywhere. It’s been many weeks of construction, but now that I have Advanced Air Temperature Control handling devices in place, I can finally start handling my clay.